============================================================================== INTERFERENCE MATRIX — every part pair, exact boolean ============================================================================== pairs total 378 bbox-overlapping 42 exact-checked 42 ZERO INTERFERENCES across the assembly. 1 DESIGNED JOINT(S) — interpenetration is intentional: secondary_holder + secondary_stalk 219.7 mm3 M10 stud into rear boss 15 face-contact pair(s) (0 clearance, no overlap): tube - focuser_board mirror_cell - primary mirror_cell - fan_shroud fan_shroud - fan spider_hub - spider_vane_1 spider_hub - spider_vane_2 spider_hub - spider_vane_3 spider_hub - spider_vane_4 spider_hub - secondary_stalk secondary_stalk - secondary focuser_board - focuser_body focuser_body - imaging_train tube_ring_1 - dovetail tube_ring_2 - dovetail dew_shield_half_1 - dew_shield_half_2 ============================================================================== FIT SCHEDULE — designed dimensions, arithmetic on the driving parameters ============================================================================== Fit designed spec verdict Mirror OD to edge-roller face (radial) 0.750 0.50-1.00 PASS Cell OD to tube ID (per side) 0.550 0.30-0.80 PASS Vane thickness to hub slot (per side) 0.060 0.05-0.15 PASS Secondary to holder seat (per side) 0.400 0.20-0.60 PASS Ring bore to tube OD (per side) 0.250 0.10-0.40 PASS Drawtube to board bore (per side) 0.750 0.25-0.75 PASS Clip face above glass front 0.400 0.30-0.50 PASS Printed mating clearance 0.250 0.20-0.35 PASS CONTACT REGISTER — pairs that MUST touch (0 gap, 0 overlap): primary - mirror_cell gap 0.000 overlap 0.0 mm3 CONTACT OK focuser_board - tube gap 0.000 overlap 0.0 mm3 CONTACT OK focuser_body - focuser_board gap 0.000 overlap 0.0 mm3 CONTACT OK fan_shroud - mirror_cell gap 0.000 overlap 0.0 mm3 CONTACT OK dovetail - tube_ring_1 gap 0.000 overlap 0.0 mm3 CONTACT OK ============================================================================== OPTICAL SWEPT-ENVELOPE CHECK ============================================================================== Light cone radius at primary 100.0 mm Tube inner radius 123.5 mm Radial clearance, beam to tube 23.5 mm PASS Parts intruding into the light path between primary and secondary: NONE (radial distance of the nearest vertex to the optical axis; beam radius 100 mm) ============================================================================== PRINTABILITY — Bambu H2C envelope 305 x 320 x 325, 5 mm margin ============================================================================== Part X Y Z best fit overhang verdict mirror_clip 26.0 14.0 11.0 OK 21.8% PASS edge_roller 21.2 21.2 14.0 OK 15.1% PASS fan_shroud 132.0 132.0 18.0 OK 12.5% PASS secondary_holder 126.0 82.0 82.0 OK 17.7% PASS dew_shield_half 300.0 256.4 128.2 OK 0.4% PASS cable_guide 30.0 16.0 10.0 OK 14.9% PASS Usable build box after margin: 295 x 310 x 315 mm SUMMARY: interferences 0 | clearance fails 0 | print fails 0